Secrets that will make the UPS battery work amazing

Uninterrupted Power Saving batteries render power supply to the computer when there is sudden power cut. If maintained properly, these batteries work efficiently. Following are the secrets to make UPS battery work better:

1. Evaluate the needs: Evaluate the needs of requirements say if you want UPS to render power supply to more than one computer then it is better if you distribute the power supply equally. Such equal distribution of power load will enable to get longer battery life out of UPS.

2. Apply half of fewer loads on UPS compared to its maximum power.

3. It is advisable to check water level of batteries frequently say for once in every two weeks. This will enable optimum functioning of the batteries.

4. Always use only prescribed water i.e. distilled water or the one coming from air conditioning is preferable. Never use tap water as it contains some salts that decrease the efficiency of the batteries.

5. Place UPS and the batteries in cool and dry place, as exposed to sun light may lead to overheating of the batteries and will eventually cause damage to the sensitive internal circuits.

6. Never apply variable loads of Television, PC, etc on UPS as it requires more energy. Do not over load the UPS by connecting printers, fax machines or scanners to it.

7. Never discharge battery completely and if there is long power breakage say more than 2-3 hours then it is better to turn off the UPS.

8. Always make use of high quality wiring equipment like pure copper wiring to obtain efficient performance from the UPS.

9. Make optimum use of UPS back up power. Do not use the computer till the UPS turns off due to lack of backup power in UPS battery.

10. Refrain connecting an external device to UPS when it runs during power shutdown.

11. It is vital to pair the UPS with voltage stabilizer, it will double the life of your UPS battery and will also secure the system.

12. Do buy replacement battery cartridge while buying a UPS.

13. The moment UPS is bought, charge it for a minimum of 12 hours before connecting it to any device. This will provide long life to the battery.

14. UPS when fully charged; connect it to computer and run it in backup support. It is advisable never to overuse the backup power.

15. It is advisable to turn the UPS off when you shut down the computer in the night as if the UPS is run throughout the night the life of the battery will diminish.

UPS batteries on an average have the life span of 2- 3 years. If maintained properly the battery will give good performance. Also it is advisable to leave the main switch on so that UPS can gather enough power to render back up support.

Maintain SMF Batteries Maintenance Free

SMF or the sealed maintenance free batteries are the ones that are architect-ed to render reliable, consistent and low maintenance power for UPS applications. These batteries are designed to withstand various troublesome electric conditions like overcharge and over discharge.

For optimum performance of the SMF batteries one has to maintain them and must follow certain- 

 

Do’s and Don’ts aspects which are as follows:

Do’s:                     

1. Store the batteries in cool and covered areas
 

2. Go through the installation manual before starting installation of batteries.
 

3. Always keep the SMF batteries away from sparks, heat source or fire.
 

4. Charge the battery once in 3 months, in case of the battery kept unused or ideal
 

5. In case the battery is damaged before installation, then stop installing it and inform the manufacturer immediately.
 

6. Keep the battery free from dust particles and clean them with dry cloth
 

7. Make use of proper sixe cables along with proper plugs and crimping during installation.
 

8. Always set the charging parameters in sync with the maintenance manual
 

9. Charge the batteries immediately after the discharge as per the specifications given.
 

10. Tighten the terminal bolts with spring washers and apply torque. Check the tightness of all the bolts once 

in 6 months.
 

11. Keep the record of current and voltages once in a month in prescribed register or record.
 

12. Provide proper isolation between battery and battery rack.
 

13. Boost cum float charging is good for SMF batteries.

Don’ts:
 

1. Do not keep the battery in direct sunlight, dust or in moist place as it will result in short circuiting and damage thereafter.
 

2. Acid or DM water should not be added
 

3. Do not tamper the vent plugs.
 

4. Avoid over tightening or under tightening of the terminal bolts as it may result in terminal breakage or fire 

due to lose contact.
 

5. Do not allow ant metal object to rest on the battery as it may lead to short circuit.
 

6. Never mix different capacities, different brands, different type viz. VRLA, Flooded/ Tubular batteries and different manufacturers batteries in the circuit.
 

7. Never do cell tapping during the service life of the SMF battery.
 

8. Never make use of underrating cables for connecting the battery.
 

9. Do not install the SMF battery in a completely sealed container. There should be sufficient ventilation for air circulation.
 

10. Never allow battery to discharge for more than 12 hours in the idle condition.
 

11. Never deep discharge the battery below the limits specified.
 

12. If the equipment is not using for long time, it should be charged once in every week. If the battery is allowed to charge and discharge frequently, the life of the SMF battery is extended to 3-5 years.

Things you should know before selecting motorcycle battery

A battery acts like heartbeat for your motorcycle and therefore, you need to be very cautious while selecting one. But, when you plan to gear up your bike ride with a powerful battery, you will surely feel confused by seeing hundreds of variants available in the marketplace. However, it is always good to have options but at the same time, it becomes challenging for you to pick the best one. 

Not to worry, as long as experts are available to offer you great deal in choosing the adequate one for your motorcycle. Here are some of the excellent tips shared by experts, directed to make your process of choosing a battery easier than ever:

Engine compatibility: There is no point of buying the costliest and most powerful battery under the sky until and unless it goes with your bike’s engine. Each bike has different engine structure and battery requirement varies as per that only. Hence, don’t get carried away with the masculine battery offers available in the marketplace, choose wisely as per your engine requirements.

Longevity & Performance: If you require the battery for short distance trips, then you might not be too much serious about longevity and performance but or long distance trips, you bike will need a battery with more horse power.

Battery type-Rechargeable or not: There are batteries available with rechargeable and not rechargeable categories. If you require longer backup then you can opt for rechargeable option, but at this point, you will have to look for various features, which justify desired performance of a rechargeable battery.

Startup compatibility with climate:You are obviously aware of the climate you operate in. But, you need to understand the fact that different batteries are designed for performing adequately in different climatic conditions. It is smart to choose the powerhouse, which will keep your bike going strong in the desired weather conditions. For example, some batteries are designed to resist moisture; hence they perform better in the damp areas. On the other hand, there are batteries exclusively designed for warm climate conditions.

Warranty:This is the strongest element of battery purchasing process. When you invest money to renew your bike’s powerhouse, you surely don’t want to be disheartened in a short span of time. Therefore, choosing a battery, which promises to give longer performance assurance through a warranty card, is really important. Choose the battery with best warranty benefits to enjoy superb battery performance with your motorcycle.

Motorcycle rides are totally worth it, when you have chosen the strong performance battery. It will enhance the performance standards of your motorcycle and gear up your experience of traveling towards your destination without any worries of battery failure or technical disturbance ever.

Article Published by www.trontek.com

 

Improve your life with UPS batteries?

Performance of UPS batteries is highly important for those, who rigorously work on computers and other electronic device. However, with constant usage without paying attention towards required power saving attributes of the device, people might start facing battery failure after a very short span of usage. This can be really problematic and to handle that, it is required for the users to learn certain tips and tricks, which not only improve battery life of the UPS but also the overall performance.

It is recommended to keep a check on following pointers so that nothing harms your battery and you get to use it for a longer period of time.

Ventilation: Lack of ventilation while using the UPS becomes one of the most highlighted reasons for battery failure. It is recommended by the manufacturers as well as maintenance experts to place the UPS setup in a ventilated area.

Placement in dry and cool place: The temperature of the surroundings, where UPS is placed should be cool and dry. Moisture present in the air might harm the functioning of battery. Also, it is required to make sure that there’s proper arrangement for cooling down the area because the battery releases excessive heat while performing its function.

Run battery calibrations: Experts recommend that battery calibrations should be performed twice a year only. More than that might lead to battery failure.

Right ways to utilize the UPS battery: Experts strictly advise to pay attention towards current battery usage. You cannot expect the battery to perform any longer for you, if you misuse it. Always shut down the device when the battery is utilized more than 80 percent.

Don’t connect laser printer with UPS: Never ever try to connect your laser printer with the battery because it might cause various problems and breakdown your battery.

When you purchase the new UPS battery, you should read the instruction manual in detail. One of the most common mistakes user make is not flipping the manual. The small size booklet which comes along with the device is designed by the expert makers of the device itself. Therefore, you will find detailed information about the cautions and methods to enhance life span of your battery.

Using the product in right manner obviously adds up to its life. It also helps you to have complete value of money in terms of extended usage, without any requirement of repairs.

One should always keep in mind that nothing beats the original product. Even if you get the damaged battery repaired from best mechanic in your city, it will never perform as excellent as the original one. Hence, using the electronic device smartly rather than facing problems and spending a lot of money on repairs is a smart choice. Original Resource:-  http://trontek.edublogs.org/2015/04/15/how-to-improve-life-span-of-ups-batteries/

Test Your Car Batteries When You Buying New

For a layman buying car batteries can be a bit challenging job. In order to grab the best car batteries one has to take into account certain precautions in buying those. So what exactly is the car battery? Car battery is what powers the car’s starter and ignition system. It is the battery that provides the power for lighting and accessories and renders power to the electrical system for the vehicle when the charging system is not operational.

 

Following are the steps to test car batteries before finalizing its purchase:

Identify the battery: Before jumping to purchase the car battery first identify the kind and size of battery that is presently fitted in the car. The most convenient way to find this information is by looking at the manual of the car.

Understand the terminology: One should understand the basic terminology of the batteries in order to compare the similar models in order to get the best deal.

Check the cold cranking amps (CCA): CCA is the measure of a battery’s ability to start the vehicle in cold weather conditions. The size of the battery CCA rating should meet or escalate the car’s original equipment manufacturer cranking rate.  This is the vital factor in deciding the fact whether the battery fits the usage of the vehicle or not. If the car is in usage in cold climatic conditions, then it is best option to go for car batteries with high CCA ratings. As the sluggish, chilled engines requires more power to start the vehicle up.

Reserve capacity: It is the number of minutes that enables the car to operate with battery alone in case there is failure in the alternator. Buy the car battery with longest reserve capacity possible as in case of emergency situations where the vehicle has halted or not staring then in such cases batteries with longest reserve capacity will be of great help.   

Never purchase the car battery that has been on store shelf for more than six months. First check the manufacturing date printed on the battery.

Group size: This refers to the outside dimensions and placement of power terminals on the battery. As different vehicles have different group size, it is advisable to go for group size that is recommended for the vehicle.

Check the prices: The prices of the batteries will vary as per the size and the power. Normally prices are standardized and this can be checked by comparing prices on line. See that there is warranty period with the chosen  battery.

Select the brands: Choose the brand that is prevailing in the market and opt for the most common and renowned ones. If one needs to buy a good car battery it is better to sort all the prevailing brands and compare them on the basis of rates, their market share and their sales figures. This will enable to make accurate decision of purchasing the car battery. Visits us:- http://www.trontek.com/

 

Top Motorcycle Battery Suppliers

Want to have quality and state of art motor cycle batteries? Then one can corner their selection amongst the top five battery suppliers in India. The list goes on Tata green batteries, Amco batteries, Aotous power, Amptek battery and the Trontek battery.

Among the above top rated brands, Trontek batteries are India’s leading brand that are in great demand all over the country. 

Architected with innovative technology these batteries have out of the box features:

1 Full maintenance free operation

2 No leakage, no spills and no requirement of water check

3 High standard and robust

4 Highest amp power capacity

5 Durable life because of usage of high cell compression and fibreglass mat separators

6 High level vibration resistance from extreme road condition and engine abuse

Trontek batteries have been all time favourites of the customers who opt for it because of its outstanding features and high level performance. These batteries are fabricated with lead calcium alloy and absorbed glass mat technology in order to render maintenance free operation.

Trontek batteries are not only in great demand in the country but they are also widely in use all across the globe. These batteries are architected keeping in the mind the ever increasing needs of the motorcycles and the latest techniques.

Also these batteries are architected with fibreglass mat separators and high cell compression so that the life of the battery is extended and so that one gets superior vibration resistance from the engine abuse and extreme road conditions.

Trontek batteries with the out of the box features and high level performance feature have become the buzzword in the market. In order to get more information about the trontek batteries one can visit the company’s site- trontek.com and get complete details about its products and services.


Original Resource:- https://trontek123.wordpress.com/2015/01/15/top-five-motorcycle-battery-suppliers-in-india/